Won’t Feed Cards – Evolis Kiosk
If your Evolis Kiosk will not feed cards, take the following steps Make sure the metal card hopper is installed correctly Check to see if your cards have static build up and are sticking together...
View ArticleClik here to view.
Self Adjustment – Evolis Kiosk
How to Perform a Self Adjustment – Evolis Kiosk Performing a Self Adjustment on an Evolis Kiosk printer is an excellent step for both regular maintenance and troubleshooting issues. Ensure that you...
View ArticleRibbon Breaking – Evolis Kiosk
There are two ways a ribbon can break. It can either be a straight cut or a jagged tear. If the ribbon break is a straight cut: Run a self test from the printer to eliminate the PC/software from the...
View ArticleClik here to view.
Using Evolis Hologram Overlay Varnish Ribbon
Evolis R4002 Hologram Overlay can be printed onto a card that has already been printed. Ensure that you change the ribbon type in the driver first, otherwise the Hologram ribbon will spool and the...
View Article
